BGS2 – the smallest GSM-module LGA mounting all over the world, produced by Cinterion, designed for M2M solutions that require high-speed voice and GPRS. Designed for a wide range of applications: metering, security systems, vending, POS terminals, ATMs, etc. Ultra-compact GSM module (18.8×26.7×2.7 mm) is ideal for the production of M2M host devices.
BGS2 based on a technology that allows to simplify the direct link between M2M devices, sensors and GPS receivers and reduce the overall cost to users.
GSM Module is based on an advanced chipset (65nm technology), so that the module has unprecedented performance and energy efficiency performance. Built-in TCP/IP stack, proven over many years, will ensure stable operation in all regions of Russia.
Technical characteristics
| Frequency Range, MHz | BGS2-W – GSM850/900/1800/1900
BGS2-E – GSM 900/1800 |
| Data transfer | BGS2-W – GPRS class 10
BGS2-E – GPRS class 8 |
| Managment | AT comands |
| TCP/IP steck | TCP server/client, UDP, HTTP, FTP, SMTP, POP3 via AT comands |
| Interfaces | 2 serial interfaces
Automatic baud rate detection Audio analog interface (Microphone & Speaker) UICC/SIM card interface 1.8 V and 3.0 V 8 GPIO pins 1.8 V 2 GPIO pins 2.8 V ADC/DAC (PWM) interface |
| Internet Services | FTP, ICMP, DNS,TCP server and client, UDP client |
| Voltage, V | 3.3…4.5 |
| Operating temperature range | -40°C…+85°C |
| Dimention, mm | 18.8 x 26.7 x 2.7 |
| Weight, g | 2,7 |
| Special features | Transparent mode GPRS Jamming detection Tunnel mode Binding to the base station Work with two SIM-cards The “secretary” |
Manual assembly and disassembly of the module using the LGA module BGS2 Soldering Station (Hot Air Gun):
Manual assembly and disassembly of the module using the LGA module BGS2 soldering station (Soldering Itron):